BFB0512HHA-C Delta 紧凑型风扇

品牌：: Delta

型号：: BFB0512HHA-C | Delta Electronics 12VDC 1.92W Centrifugal Blower for Electronic Equipment Cooling

类型：: 紧凑型风扇

应用行业：: 数据中心冷却

产品描述：: BFB0512HHA-C is a 12VDC centrifugal blower for local cooling inside electronic equipment. Its directed-airflow format is specified at 5900 rpm, with 196.8 Pa maximum static pressure and 1.92 W input.

规格书：: BFB0512HHA-C | Delta Electronics 12VDC 1.92W Centrifugal Blower for Electronic Equipment Cooling 规格书 (Pdf)

产品特点

Rated Voltage(V)	12
Size(mm)	50*50
Max.Air Flow(m³/h)	6.8
Max.Pressure(Pa)	196.8
Input Power(W)	1.92
Speed(rpm)	5900
Noise(db)	37.5

产品特点

Directed Air Cooling

Delta BFB0512HHA-C serves printing equipment as a brushless DC centrifugal fan. Equipment builders can use its mechanical format to establish forced ventilation near heat-producing parts.

Its listed 50 x 50 mm format defines the space needed for installation, helping designers reserve room for adjacent components and cable routing. The centrifugal format directs air into the equipment flow path, making duct transitions and outlet alignment important to usable cooling performance. A controlled exhaust route limits recirculation, allowing the delivered air to carry heat away rather than return to the inlet.

It suits engineering buyers who need a defined cooling component. Verify the exact wiring and environmental limits before approving long-term installation.

应用行业

Printing Equipment

In printing equipment, Delta BFB0512HHA-C helps remove heat from internal electronic assemblies. The cooling solution addresses heat generated during repeated operating cycles to support consistent equipment operation.

Projection Systems

For projection equipment, Delta BFB0512HHA-C provides equipment cooling around thermally loaded internal components. Managing concentrated heat inside the enclosure helps maintain steady temperature management.

Electronics Cooling

In electronic equipment, air movement helps handle localized heat buildup. Delta BFB0512HHA-C supports cooling around heat-generating circuit assemblies, contributing to thermal stability.

常见问题

What supply voltage should be used for BFB0512HHA-C?

12VDC is listed for BFB0512HHA-C. Verify the allowable input range, phase, frequency where applicable, polarity and wiring diagram in the exact specification.

What operating speed is listed for BFB0512HHA-C?

5900 rpm is listed in the workbook. This value alone does not establish adjustable-speed capability; confirm the control input and permitted operating range in the exact datasheet.

What power figure is listed for BFB0512HHA-C?

1.92 W is shown in the filter data. Check whether the corresponding datasheet defines it as rated, free-air or maximum-load input before sizing the power source.

How should noise from BFB0512HHA-C be evaluated?

The listed noise value is 37.5 dB, but compare values only under matching test conditions. Installed noise also depends on speed, restriction, resonance and enclosure geometry.

Can BFB0512HHA-C directly replace another fan?

A matching outline alone does not prove compatibility. Check 12VDC, mounting dimensions, connector, pinout, airflow direction, control signals and the required pressure-flow point.

What equipment is BFB0512HHA-C intended to cool?

BFB0512HHA-C is listed for Electronic Equipment cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.

相关产品

BFB0712HH-A | Delta Electronics 12VDC 4.08W Centrifugal Blower for Electronic Equipment Cooling

The BFB0712HH-A centrifugal blower uses a 25 mm-deep body for electronic equipment and ducted local cooling. Rated for 12VDC, it lists 243.3 Pa maximum static pressure and 4400 rpm operation at 4.08 W input.

BFB0712H | Delta Electronics 12VDC 2.64W Centrifugal Blower for Electronic Equipment Cooling

BFB0712H supplies centrifugal blower airflow for local electronic equipment cooling on 12VDC. Its 75.7 x 75.7 x 30 mm body is listed at 2900 rpm, with 119.6 Pa maximum static pressure and a 2.64 W input rating.

BFB0512HH | Delta Electronics 12VDC 2.52W Centrifugal Blower for Electronic Equipment Cooling

BFB0512HH supplies centrifugal airflow for local electronic equipment cooling from a 12VDC source. The listed 6500 rpm speed distinguishes this blower, with 7.803 m3/h maximum airflow and 2.52 W input.

BFB0512HHA-C Delta 紧凑型风扇

产品特点

产品特点

Directed Air Cooling

应用行业

Printing Equipment

Projection Systems

Electronics Cooling

常见问题

What supply voltage should be used for BFB0512HHA-C?

What operating speed is listed for BFB0512HHA-C?

What power figure is listed for BFB0512HHA-C?

How should noise from BFB0512HHA-C be evaluated?

Can BFB0512HHA-C directly replace another fan?

What equipment is BFB0512HHA-C intended to cool?

相关产品

BFB0712HH-A | Delta Electronics 12VDC 4.08W Centrifugal Blower for Electronic Equipment Cooling

BFB0712H | Delta Electronics 12VDC 2.64W Centrifugal Blower for Electronic Equipment Cooling

BFB0512HH | Delta Electronics 12VDC 2.52W Centrifugal Blower for Electronic Equipment Cooling

在线留言