UF-18JC23BTHD 富泰克轴流风机

品牌：: 富泰克

型号：: UF-18JC23BTHD | Fulltech 230VAC 72W AC Axial Fan for HVAC and Industrial Equipment Cooling

类型：: 轴流风机

应用行业：: 暖通空调与通风

产品描述：: For HVAC and industrial cooling, UF-18JC23BTHD is a 230 VAC AC axial fan in a 180 × 180 × 90 mm package. Ball-bearing construction is the central durability detail, paired with terminal connection and motor protection. Rated data: 72 W input, up to 782 m³/h, 3400 rpm, 59 dB. Its stated operating and dimensional data support system comparison.

规格书：: UF-18JC23BTHD | Fulltech 230VAC 72W AC Axial Fan for HVAC and Industrial Equipment Cooling 规格书 (Pdf)

产品特点

Rated Voltage(V)	230
Size(mm)	18018090
Max.Air Flow(m³/h)	782
Input Power(W)	72
Speed(rpm)	3400
Noise(db)	59

产品特点

High Airflow Cooling

Fulltech UF-18JC23BTHD supports industrial ventilation systems with AC axial fan cooling. The design helps move warm air out of confined equipment spaces before heat affects nearby components.

A listed air-delivery ceiling of 782 m3/h supports thermal planning for the target equipment. Clear inlet space and a defined outlet reduce avoidable flow loss. The listed stator coating adds a construction detail for installations where protected motor components are important to service planning.

For design-in or replacement purchasing, UF-18JC23BTHD offers a model-specific industrial cooling option. Verify wiring, airflow direction and operating conditions against the exact datasheet. This supports repeatable engineering review from prototype to production.

应用行业

HVAC & Refrigeration

Fulltech UF-18JC23BTHD is used in HVAC and refrigeration equipment, moving air around heat-exchange sections to address recurring heating and cooling loads. The fan gives OEM equipment a planned airflow route, supports stable system operation and helps reduce localized heat.

Heat Exchangers

Fulltech UF-18JC23BTHD is used in heat exchangers, moving air around coil and exchanger surfaces to address thermal energy transferred through the assembly. The fan gives OEM equipment a planned airflow route, supports effective heat rejection and helps reduce localized heat.

Industrial Ventilation

Fulltech UF-18JC23BTHD is used in industrial ventilation systems, moving air around equipment air passages to address continuous ventilation demand. The fan gives OEM equipment a planned airflow route, supports controlled air circulation and helps reduce localized heat.

常见问题

How should UF-18JC23BTHD be matched to an enclosure?

Check the 180 × 180 × 90 mm dimensions, 782 m³/h maximum airflow at 3400 rpm, available mounting space, system resistance, and required ventilation duty.

Is UF-18JC23BTHD suitable for high-reliability thermal management?

Its ball-bearing construction and documented motor protection support industrial cooling use. Reliability still depends on correct sizing, clean airflow, and operation within ratings.

What should be checked if UF-18JC23BTHD stops or airflow drops?

Confirm the 230 VAC supply, wiring, obstructions, impeller freedom, and protection status. Replace or service only after isolating power.

Does UF-18JC23BTHD use a ball-bearing design?

Yes. Ball bearings are listed in the supplied model reference; installation temperature and loading still influence service life.

How should procurement confirm availability for UF-18JC23BTHD?

Stock and lead time can change. Confirm the exact model suffix, quantity, and required delivery date with the supplier before ordering.

Does UF-18JC23BTHD support speed control?

Speed-control capability is not stated in the supplied reference. Use the rated supply and confirm any controller with the datasheet or supplier before installation.

相关产品

UF-16FC23BTHD | Fulltech 230VAC 41W AC Axial Fan for HVAC and Industrial Equipment Cooling

For equipment designers serving HVAC, refrigeration, heat exchangers, and industrial cooling, Fulltech UF-16FC23BTHD offers a 160 × 160 × 62 mm AC axial fan rated for 230 VAC. Motor protection is a key selection detail, supported by a die-cast frame, ball bearings, and terminal connection. Rated data: 41 W input, up to 451 m³/h, 3400 rpm, 56 dB.

UF-15KM23BWH | Fulltech 230VAC 42W AC Axial Fan for Control Cabinet and Power Supply Cooling

The 150 × 172 × 55 mm UF-15KM23BWH brings 230 VAC AC axial fan ventilation to industrial cabinets and power supplies. Its die-cast aluminum frame is the representative structural feature; ball bearings and lead-wire connection are also documented. Rated data: 42 W input, up to 391 m³/h, 3250 rpm, 53 dB.

UF-15A23BTH | Fulltech 230VAC 31W AC Axial Fan for Control Cabinet and Power Supply Cooling

In industrial cabinets and power supplies, UF-15A23BTH supplies airflow through a 150 × 172 × 38 mm, 230 VAC AC axial fan configuration. Motor protection is a key selection detail, supported by a die-cast frame, ball bearings, and terminal connection. Rated data: 31 W input, up to 337 m³/h, 3200 rpm, 55 dB.

UF-15KMR23 BWHF | Fulltech 230VAC 45W AC Axial Fan for Control Cabinet and Power Supply Cooling

Built around 150 × 172 × 55 mm, the UF-15KMR23 BWHF uses a 230 VAC AC axial fan arrangement for industrial cabinets and power supplies. Lead-wire connection distinguishes this version, alongside a die-cast frame, ball bearings, and protection. Rated data: 45 W input, up to 433 m³/h, 3150 rpm, 61 dB.

UF-15KM23BWHF | Fulltech 230VAC 42W AC Axial Fan for Control Cabinet and Power Supply Cooling

Fulltech UF-15KM23BWHF provides 230 VAC AC axial fan cooling for industrial cabinets and power supplies from a 150 × 172 × 55 mm format. Ball-bearing construction is the central durability detail, paired with lead-wire connection and motor protection. Rated data: 42 W input, up to 391 m³/h, 3250 rpm, 53 dB.

UF-17PC23BTH | Fulltech 230VAC 29W AC Axial Fan for HVAC and Industrial Equipment Cooling

A Ø172 × 51 mm body, 230 VAC rating, and AC axial fan configuration define Fulltech UF-17PC23BTH for cooling in HVAC, refrigeration, heat exchangers, and industrial cooling. Motor protection is a key selection detail, supported by a die-cast frame, ball bearings, and terminal connection. Rated data: 29 W input, up to 384 m³/h, 3400 rpm, 55 dB.

UF-18JC23BTHD 富泰克 轴流风机

产品特点

产品特点

High Airflow Cooling

应用行业

HVAC & Refrigeration

Heat Exchangers

Industrial Ventilation

常见问题

How should UF-18JC23BTHD be matched to an enclosure?

Is UF-18JC23BTHD suitable for high-reliability thermal management?

What should be checked if UF-18JC23BTHD stops or airflow drops?

Does UF-18JC23BTHD use a ball-bearing design?

How should procurement confirm availability for UF-18JC23BTHD?

Does UF-18JC23BTHD support speed control?

相关产品

UF-16FC23BTHD | Fulltech 230VAC 41W AC Axial Fan for HVAC and Industrial Equipment Cooling

UF-15KM23BWH | Fulltech 230VAC 42W AC Axial Fan for Control Cabinet and Power Supply Cooling

UF-15A23BTH | Fulltech 230VAC 31W AC Axial Fan for Control Cabinet and Power Supply Cooling

UF-15KMR23 BWHF | Fulltech 230VAC 45W AC Axial Fan for Control Cabinet and Power Supply Cooling

UF-15KM23BWHF | Fulltech 230VAC 42W AC Axial Fan for Control Cabinet and Power Supply Cooling

UF-17PC23BTH | Fulltech 230VAC 29W AC Axial Fan for HVAC and Industrial Equipment Cooling

在线留言

UF-18JC23BTHD 富泰克轴流风机