9G0824H1D01 三洋轴流风机

品牌：: 三洋

型号：: 9G0824H1D01 | Sanyo Denki 24VDC 10.1W DC Axial Fan for UPS, server and telecom equipment cooling

类型：: 轴流风机

应用行业：: 数据中心冷却

产品描述：: Sanyo Denki configures 9G0824H1D01 for servers, UPS systems, and telecom equipment as a 24 VDC DC axial fan with 80 × 80 × 38 mm dimensions. 10.1 W input is the defining electrical-load figure. Base cabinet ventilation planning on the stated acoustic value. Use current model documentation to validate protection choices.

产品特点

Rated Voltage(V)	24
Size(mm)	808038
Max.Air Flow(m³/h)	134.4
Max.Pressure(Pa)	171.1
Input Power(W)	10.1
Speed(rpm)	5700
Noise(db)	49

产品特点

High Airflow Design

9G0824H1D01 brings San Ace DC axial fan cooling to servers, storage systems and ICT equipment. The compact air-moving design suits OEM assemblies that require continuous ventilation around electronic and power components.

Its 134.4 m3/h maximum airflow supports rapid air exchange, while 171.1 Pa pressure capability helps overcome resistance within the finished equipment. Buyers should confirm the complete suffix, connector, sensor output and control option before ordering. Engineers should validate the operating point with the actual grille and filter.

Check startup demand against the power supply. It gives integrators a practical acceptance criterion. Confirm the final fan curve in the assembled equipment.

应用行业

Server Cooling

SANYO DENKI 9G0824H1D01 serves server chassis and computing nodes that operate with sustained internal heat. Directed airflow carries component heat toward the equipment exhaust and helps maintain a controlled internal temperature. The application supports stable equipment service.

Storage Systems

9G0824H1D01 is suitable for storage arrays and data appliances. Reliable ventilation reduces hot spots around sensitive electronics and supports consistent equipment availability. The application supports stable equipment service. Selection should follow the approved full model code.

ICT Equipment

The San Ace 9G0824H1D01 supports thermal management in network and other ICT hardware. Reliable ventilation reduces hot spots around sensitive electronics and supports consistent equipment availability. The application supports stable equipment service.

常见问题

What should procurement confirm for 9G0824H1D01?

Confirm full suffix, voltage, connector, control signal, bearing, IP rating, certifications, stock, and required delivery date.

Does 9G0824H1D01 have a pressure rating?

The worksheet lists 171.1 Pa. Use the official curve to match it to system resistance.

Is 9G0824H1D01 suitable for high-reliability cooling?

Evaluate the exact bearing, life, temperature, alarm, and protection data. Correct sizing and clean airflow are also required for reliable operation.

Which application details matter most for 9G0824H1D01?

Review ambient temperature, airflow restriction, contamination exposure, noise limit, mounting orientation, and maintenance access.

What airflow is listed for 9G0824H1D01?

The worksheet lists 134.4 m³/h. Compare the operating point with system resistance and the official performance curve.

Can 9G0824H1D01 reduce total operating cost?

Compare its listed power with the required airflow, pressure, and operating hours. System-level savings depend on correct duty-point selection.

相关产品

G1G146-BA07-52 | ebm-papst 24V 100W EC Centrifugal Blower for Boiler Systems

Aimed at Boiler Systems, the ebm-papst G1G146-BA07-52 is a 24 V EC backward-curved centrifugal fan, for which the table lists a listed pressure capability of 500 Pa. This assists electrical and mechanical review.

G1G133-DE19-15 | ebm-papst 24V 45W EC Centrifugal Blower for Boiler Systems

Integrated into Boiler Systems, the ebm-papst G1G133-DE19-15 is a 24 V EC backward-curved centrifugal fan, specified with a documented 45 W input rating. The rating aids system-fit checks.

G1G097-AA05-01 | ebm-papst 24V 16W EC Centrifugal Blower for Boiler Systems

Suited to Boiler Systems, ebm-papst G1G097-AA05-01 is a 24 V EC backward-curved centrifugal fan, marked by a documented 16 W input rating. It provides a practical sizing reference.

G2E140-AL40-01 | ebm-papst 230V 145W AC Centrifugal Blower for Dehumidifiers

Targeting dehumidifiers, G2E140-AL40-01 pairs 230 V operation with a AC centrifugal blower layout. For selection, its most distinctive listed attribute is IP44 protection with thermal-overload protection.

G2D180-BD18-13 | ebm-papst 400V 430W AC Centrifugal Blower for Inverter Cooling

In inverter cooling, G2D180-BD18-13 serves as a 400 V AC centrifugal blower. Its standout data point is 840 Pa pressure with IP00 protection. It supports exact-model comparison for OEM sourcing and replacement work.

G2D180-BD18-11 | ebm-papst 400V 305W AC Centrifugal Blower for CNC Machines

G2D180-BD18-11 is specified as a 400 V AC centrifugal blower for cnc machines. Its selection profile is led by 700 Pa pressure with 2,650 rpm operation. It supports exact-model comparison for OEM sourcing and replacement work.

9G0824H1D01 三洋 轴流风机

产品特点

产品特点

High Airflow Design

应用行业

Server Cooling

Storage Systems

ICT Equipment

常见问题

What should procurement confirm for 9G0824H1D01?

Does 9G0824H1D01 have a pressure rating?

Is 9G0824H1D01 suitable for high-reliability cooling?

Which application details matter most for 9G0824H1D01?

What airflow is listed for 9G0824H1D01?

Can 9G0824H1D01 reduce total operating cost?

相关产品

G1G146-BA07-52 | ebm-papst 24V 100W EC Centrifugal Blower for Boiler Systems

G1G133-DE19-15 | ebm-papst 24V 45W EC Centrifugal Blower for Boiler Systems

G1G097-AA05-01 | ebm-papst 24V 16W EC Centrifugal Blower for Boiler Systems

G2E140-AL40-01 | ebm-papst 230V 145W AC Centrifugal Blower for Dehumidifiers

G2D180-BD18-13 | ebm-papst 400V 430W AC Centrifugal Blower for Inverter Cooling

G2D180-BD18-11 | ebm-papst 400V 305W AC Centrifugal Blower for CNC Machines

在线留言

9G0824H1D01 三洋轴流风机