EF80152B1-EE070-S99 SUNON 轴流风机

品牌：: SUNON

型号：: EF80152B1-EE070-S99 | SUNON 24V 2.16W 80x80x15mm DC Axial Fan for Industrial Cooling

类型：: 轴流风机

应用行业：: 工业冷却

产品描述：: Built for telecom cabinets, base stations, and network equipment, SUNON EF80152B1-EE070-S99 uses a 80 × 80 × 15 mm DC blower arrangement at 24 VDC. 2.16 W input is the defining electrical load in the supplied data. Treat the frame geometry as a primary input to wiring review. Confirm environmental protection for the ordered version.

规格书：: EF80152B1-EE070-S99 | SUNON 24V 2.16W 80x80x15mm DC Axial Fan for Industrial Cooling 规格书 (Pdf)

产品特点

Rated Voltage(V)	24
Size(mm)	808015
Input Power(W)	2.16

产品特点

Reliable Fan Cooling

SUNON EF80152B1-EE070-S99 is a DC brushless axial fan for industrial equipment. It establishes forced airflow where passive cooling cannot adequately protect heat-producing assemblies.

The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. Correct airflow direction and inlet clearance help translate the documented operating point into reliable equipment-level cooling.

The final EF80152B1-EE070-S99 selection should consider connector reach as part of the installation layout. Finishing acoustic evaluation before ordering helps reduce integration uncertainty and supports reliable equipment cooling. Confirm that the mating lead reaches without tension or sharp bending.

应用行业

Industrial Equipment

SUNON EF80152B1-EE070-S99 serves industrial machinery and electronic equipment. Airflow around controllers, drives and power devices helps address continuous internal heat. The fan gives OEM equipment a defined air route and supports stable equipment operation.

常见问题

What voltage is required by EF80152B1-EE070-S99?

The listed rating is 24 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.

What should be checked if EF80152B1-EE070-S99 stops?

Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.

What bearing information is confirmed for EF80152B1-EE070-S99?

The exact bearing option is not confirmed by the row-level data. Check the complete suffix in the current SUNON specification.

What input power is listed for EF80152B1-EE070-S99?

The worksheet lists 2.16 W input. Check supply capacity and operating conditions before commissioning.

What certification information is listed for EF80152B1-EE070-S99?

The workbook marks the product as RoHS compliant. Confirm UL, TUV, VDE, or other project-specific approvals for the exact suffix.

相关产品

EF40100B1-1Q00-S99 | SUNON 12V 40x40x10mm DC Axial Fan for Industrial Cooling

Within telecom cabinets, base stations, and network equipment, SUNON EF40100B1-1Q00-S99 serves as a 40 × 40 × 10 mm DC blower operating at 12 VDC. Its 40 × 40 × 10 mm format is the main stated selection detail. Use the documented frame geometry when planning controller selection. Treat bearing and life data as suffix-specific.

EF50101B2-C041-S99 | SUNON 12V 1.44W 50x50x10mm DC Axial Fan for Industrial Cooling

Used in telecom cabinets, base stations, and network equipment, SUNON EF50101B2-C041-S99 is a 12 VDC DC blower in a 50 × 50 × 10 mm frame. A listed input of 1.44 W is the model's notable electrical characteristic. The recorded acoustic value should guide controller selection. Treat bearing and life data as suffix-specific.

EF40101B2-1C020-S99 | SUNON 12V 0.45W 40x40x10mm 9.3m3/h DC Axial Fan for Industrial Cooling

SUNON EF40101B2-1C020-S99 combines a 40 × 40 × 10 mm DC axial fan platform with a 12 VDC rating for telecom cabinets, base stations, and network equipment. A listed noise value of 17.7 dB is the model's key differentiator. Base mounting verification on the stated technical profile. Validate mounting and wiring from the model drawing.

EF40201BX-1Q140-S99 | SUNON 12V 0.78W 40x40x20mm 18.3m3/h DC Axial Fan for Industrial Cooling

The EF40201BX-1Q140-S99 is SUNON's 12 VDC, 40 × 40 × 20 mm DC axial fan option for telecom cabinets, base stations, and network equipment. 8200 rpm is the model's most distinctive operating parameter. Use the documented cooling specification when planning mounting verification. Validate mounting and wiring from the model drawing.

EF60151BX-Q010-S99 | SUNON 12V 1.44W 60x60x15mm DC Axial Fan for Data Center Cooling

The 12 VDC SUNON EF60151BX-Q010-S99 is a DC blower sized 60 × 60 × 15 mm for servers and data-center electronics. A listed input of 1.44 W is the model's notable electrical characteristic. For mounting verification, start with the supplied supply requirement. Validate mounting and wiring from the model drawing.

EF40101B1-1Q070-S99 | SUNON 12V 0.99W 40x40x10mm 13.6m3/h DC Axial Fan for Industrial Cooling

The EF40101B1-1Q070-S99 is SUNON's 12 VDC, 40 × 40 × 10 mm DC axial fan option for telecom cabinets, base stations, and network equipment. Its 13.6 m³/h airflow rating suits the stated equipment-cooling role. Treat the model record as a primary input to airflow-path design. Obtain the applicable curve before final duty-point approval.

EF80152B1-EE070-S99 SUNON 轴流风机

产品特点

产品特点

Reliable Fan Cooling

应用行业

Industrial Equipment

常见问题

What voltage is required by EF80152B1-EE070-S99?

What should be checked if EF80152B1-EE070-S99 stops?

What bearing information is confirmed for EF80152B1-EE070-S99?

What input power is listed for EF80152B1-EE070-S99?

What certification information is listed for EF80152B1-EE070-S99?

相关产品

EF40100B1-1Q00-S99 | SUNON 12V 40x40x10mm DC Axial Fan for Industrial Cooling

EF50101B2-C041-S99 | SUNON 12V 1.44W 50x50x10mm DC Axial Fan for Industrial Cooling

EF40101B2-1C020-S99 | SUNON 12V 0.45W 40x40x10mm 9.3m3/h DC Axial Fan for Industrial Cooling

EF40201BX-1Q140-S99 | SUNON 12V 0.78W 40x40x20mm 18.3m3/h DC Axial Fan for Industrial Cooling

EF60151BX-Q010-S99 | SUNON 12V 1.44W 60x60x15mm DC Axial Fan for Data Center Cooling

EF40101B1-1Q070-S99 | SUNON 12V 0.99W 40x40x10mm 13.6m3/h DC Axial Fan for Industrial Cooling

在线留言