ME60151V1-000U-G99 SUNON 轴流风机

品牌：: SUNON

型号：: ME60151V1-000U-G99 | SUNON 12V 1.92W 60x60x15mm 42.84m3/h DC Axial Fan for Industrial Cooling

类型：: 轴流风机

应用行业：: 工业冷却

产品描述：: SUNON configures ME60151V1-000U-G99 as a 60 × 60 × 15 mm DC blower for industrial electronics and equipment cooling, operating at 12 VDC. 37.3 Pa maximum pressure is the standout documented duty-point value. During service-life planning, compare the model's pressure capability. Check the ordering suffix before assigning control functions.

规格书：: ME60151V1-000U-G99 | SUNON 12V 1.92W 60x60x15mm 42.84m3/h DC Axial Fan for Industrial Cooling 规格书 (Pdf)

产品特点

Rated Voltage(V)	12
Size(mm)	606015
Max.Air Flow(m³/h)	42.84
Max.Pressure(Pa)	37.3
Input Power(W)	1.92
Speed(rpm)	5400
Noise(db)	36.2

产品特点

MagLev Cooling

SUNON ME60151V1-000U-G99 is a DC brushless axial fan for industrial equipment. It establishes forced airflow where passive cooling cannot adequately protect heat-producing assemblies.

The matched model document identifies MagLev construction, helping reduce mechanical contact and support durable motor operation. Acoustic performance depends on the enclosure and operating point; low-turbulence integration helps avoid additional airflow noise.

A dependable ME60151V1-000U-G99 installation starts with a review of exhaust separation. Complete duty-point validation within OEM validation to confirm compatibility, operating margin and the information needed for repeat orders. Separate discharge air from the intake path inside the finished enclosure.

应用行业

Industrial Equipment

SUNON ME60151V1-000U-G99 serves industrial machinery and electronic equipment. Airflow around controllers, drives and power devices helps address continuous internal heat. The fan gives OEM equipment a defined air route and supports stable equipment operation.

常见问题

Is ME60151V1-000U-G99 compatible with a replacement fan?

Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.

How can ME60151V1-000U-G99 affect operating cost?

Compare its listed 1.92 W input with the required airflow and run time. Total savings depend on the complete system duty point.

What noise data are available for ME60151V1-000U-G99?

The worksheet lists 36.2 dB. Installation distance, airflow resistance, and enclosure acoustics can change the measured result.

What should be checked if ME60151V1-000U-G99 stops?

Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.

What bearing information is confirmed for ME60151V1-000U-G99?

The exact bearing option is not confirmed by the row-level data. Check the complete suffix in the current SUNON specification.

相关产品

ME70202V1-000U-G99 | SUNON 24V 1.59W 70x70x20mm 49.3m3/h DC Axial Fan for Industrial Cooling

The ME70202V1-000U-G99 is SUNON's 24 VDC, 70 × 70 × 20 mm DC blower option for industrial electronics and equipment cooling. 34.9 Pa maximum pressure is the standout documented duty-point value. Use the documented volume-flow figure when planning thermal validation. Review connector, alarm, and sensor options separately.

ME80152V1-000U-G99 | SUNON 24V 2.21W 80x80x15mm 62.9m3/h DC Axial Fan for Industrial Cooling

Built for industrial electronics and equipment cooling, SUNON ME80152V1-000U-G99 uses a 80 × 80 × 15 mm DC blower arrangement at 24 VDC. Its 3000 rpm rating defines a lower-speed operating point. For airflow-path design, start with the supplied suffix definition. Obtain the applicable curve before final duty-point approval.

ME80251V1-000U-A99 | SUNON 12V 1.7W 80x80x25mm 69.7m3/h DC Axial Fan for Industrial Cooling

Within industrial electronics and equipment cooling, SUNON ME80251V1-000U-A99 serves as a 80 × 80 × 25 mm DC blower operating at 12 VDC. Its 3200 rpm rating defines a lower-speed operating point. For procurement comparison, start with the supplied product configuration. Use the latest specification for frequency and tolerance limits.

ME45101V1-000U-A99 | SUNON 12V 1.32W 45x45x10mm 20m3/h DC Axial Fan for Industrial Cooling

The ME45101V1-000U-A99 is SUNON's 12 VDC, 45 × 45 × 10 mm DC blower option for industrial electronics and equipment cooling. Its 20 m³/h airflow rating suits the stated equipment-cooling role. Use the documented ventilation capacity when planning procurement comparison. Use the latest specification for frequency and tolerance limits.

ME70201V1-000U-A99 | SUNON 12V 1.56W 70x70x20mm 49.3m3/h DC Axial Fan for Industrial Cooling

SUNON ME70201V1-000U-A99 combines a 70 × 70 × 20 mm DC blower platform with a 12 VDC rating for industrial electronics and equipment cooling. 34.9 Pa maximum pressure is the standout documented duty-point value. Treat the suffix definition as a primary input to procurement comparison. Use the latest specification for frequency and tolerance limits.

ME50101V1-000U-A99 | SUNON 12V 1.32W 50x50x10mm 23.46m3/h DC Axial Fan for Industrial Cooling

The ME50101V1-000U-A99 is SUNON's 12 VDC, 50 × 50 × 10 mm DC blower option for industrial electronics and equipment cooling. Its 23.46 m³/h airflow rating suits the stated equipment-cooling role. Base thermal validation on the stated model record. Review connector, alarm, and sensor options separately.

ME60151V1-000U-G99 SUNON 轴流风机

产品特点

产品特点

MagLev Cooling

应用行业

Industrial Equipment

常见问题

Is ME60151V1-000U-G99 compatible with a replacement fan?

How can ME60151V1-000U-G99 affect operating cost?

What noise data are available for ME60151V1-000U-G99?

What should be checked if ME60151V1-000U-G99 stops?

What bearing information is confirmed for ME60151V1-000U-G99?

相关产品

ME70202V1-000U-G99 | SUNON 24V 1.59W 70x70x20mm 49.3m3/h DC Axial Fan for Industrial Cooling

ME80152V1-000U-G99 | SUNON 24V 2.21W 80x80x15mm 62.9m3/h DC Axial Fan for Industrial Cooling

ME80251V1-000U-A99 | SUNON 12V 1.7W 80x80x25mm 69.7m3/h DC Axial Fan for Industrial Cooling

ME45101V1-000U-A99 | SUNON 12V 1.32W 45x45x10mm 20m3/h DC Axial Fan for Industrial Cooling

ME70201V1-000U-A99 | SUNON 12V 1.56W 70x70x20mm 49.3m3/h DC Axial Fan for Industrial Cooling

ME50101V1-000U-A99 | SUNON 12V 1.32W 50x50x10mm 23.46m3/h DC Axial Fan for Industrial Cooling

在线留言