

Within servers and data-center electronics, SUNON XF40281BX-Q014-S9H serves as a 40 × 40 × 28 mm DC blower operating at 12 VDC. 36000 rpm is the model's most distinctive operating parameter. Use the documented pressure capability when planning application screening. Validate approvals and protection at complete-part-number level.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 40x40x28 |
| Max.Air Flow(m³/h) | 31 |
| Max.Pressure(Pa) | 6.8 |
| Input Power(W) | 18 |
| Speed(rpm) | 36000 |
| Noise(db) | 68.7 |
For server and data-center equipment, SUNON XF40281BX-Q014-S9H serves as a DC brushless axial fan. The fan supports temperature control in equipment that runs through sustained or repeated duty cycles.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.
A dependable XF40281BX-Q014-S9H installation starts with a review of exhaust separation. Complete acoustic evaluation for service documentation to confirm compatibility, operating margin and the information needed for repeat orders. Measure sound after mounting because the enclosure changes transmission.
SUNON XF40281BX-Q014-S9H serves server platforms. Airflow around processors, memory and power components helps address sustained computing loads. The fan gives OEM equipment a defined air route and supports stable server operation. It supports reliable equipment cooling.
SUNON XF40281BX-Q014-S9H serves storage equipment. Airflow around drives, controllers and power assemblies helps address continuous data workloads. The fan gives OEM equipment a defined air route and supports reliable storage availability. It supports reliable equipment cooling.
SUNON XF40281BX-Q014-S9H serves edge-computing systems. Airflow around compact processing and communication modules helps address high heat density. The fan gives OEM equipment a defined air route and supports consistent thermal control. It supports reliable equipment cooling.
SUNON XF40281BX-Q014-S9H serves data-center equipment. Airflow around critical computing assemblies helps address round-the-clock heat generation. The fan gives OEM equipment a defined air route and supports infrastructure availability. It supports reliable equipment cooling.
The exact IP or protection option is not stated in the supplied row. Confirm the full suffix in the applicable SUNON datasheet.
Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.
Compare its listed 18 W input with the required airflow and run time. Total savings depend on the complete system duty point.
The listed speed is 36000 rpm. Confirm frequency, control method, and duty point for the installed system.
Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.
Keep the airflow path clear, secure the frame without distortion, and follow the exact wiring diagram and voltage rating.

The XF40561BX-Q023-S9H is SUNON's 12 VDC, 40 × 40 × 56 mm DC blower option for servers and data-center electronics. 7.6 Pa maximum pressure is the standout documented duty-point value. During application screening, compare the model's mounting size. Validate approvals and protection at complete-part-number level.
查看更多
Applied in servers and data-center electronics, SUNON XF40281BX-Q032-S9H is a 12 VDC DC blower in a 40 × 40 × 28 mm frame. 33000 rpm is the model's most distinctive operating parameter. For application screening, start with the supplied operating point. Validate approvals and protection at complete-part-number level.
查看更多-0.webp)
Within servers and data-center electronics, SUNON XF60761BX(Series) serves as a 60 × 60 × 76 mm DC blower operating at 12 VDC. 52.8 W input is the defining electrical load in the supplied data. For technical purchasing, start with the supplied frame geometry. Request the exact performance curve for final engineering signoff.
查看更多
A 60 × 60 × 38 mm frame and 12 VDC rating define XF60381BX-10000-S9T, a DC blower for servers and data-center electronics. 26200 rpm is the model's most distinctive operating parameter. The recorded system interface should guide application screening. Validate approvals and protection at complete-part-number level.
查看更多
The 12 VDC SUNON XF40561BX-10000-S9T is a DC blower sized 40 × 40 × 56 mm for servers and data-center electronics. 8.7 Pa maximum pressure is the standout documented duty-point value. The recorded supply requirement should guide application screening. Validate approvals and protection at complete-part-number level.
查看更多
Within servers and data-center electronics, XF40281BX-10000-S9T provides a 40 × 40 × 28 mm, 12 VDC DC blower configuration. 33000 rpm is the model's most distinctive operating parameter. Review its dimensional envelope during application screening. Validate approvals and protection at complete-part-number level.
查看更多