XG40561BX-1QA90-S9I SUNON 轴流风机

品牌：: SUNON

型号：: XG40561BX-1QA90-S9I | SUNON 12V 40x40x56mm 52.8m3/h DC Axial Fan for Industrial Cooling

类型：: 轴流风机

应用行业：: 工业冷却

产品描述：: Within servers and data-center electronics, SUNON XG40561BX-1QA90-S9I serves as a 40 × 40 × 56 mm DC blower operating at 12 VDC. The supplied data list 85.5 dB, an important acoustic selection parameter. Base application screening on the stated rated dataset. Validate approvals and protection at complete-part-number level.

规格书：: XG40561BX-1QA90-S9I | SUNON 12V 40x40x56mm 52.8m3/h DC Axial Fan for Industrial Cooling 规格书 (Pdf)

产品特点

Rated Voltage(V)	12
Size(mm)	40x40x56
Max.Air Flow(m³/h)	52.8
Max.Pressure(Pa)	16.2
Speed(rpm)	40000/38000
Noise(db)	85.5

产品特点

Reliable Fan Cooling

Equipment builders can integrate SUNON XG40561BX-1QA90-S9I, a DC brushless axial fan, into industrial equipment. The design supplies the air movement required to carry component heat out of confined spaces.

The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market.

OEM teams specifying XG40561BX-1QA90-S9I should check airflow direction and complete power-budget review for service documentation. A documented interface review helps purchasing teams control fit, cooling continuity and replacement planning. Confirm startup and steady-state demand against the available supply. The final assembly should be tested under its expected thermal load.

应用行业

Industrial Equipment

SUNON XG40561BX-1QA90-S9I serves industrial machinery and electronic equipment. Airflow around controllers, drives and power devices helps address continuous internal heat. The fan gives OEM equipment a defined air route and supports stable equipment operation.

常见问题

Does XG40561BX-1QA90-S9I support speed control?

Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.

How can XG40561BX-1QA90-S9I affect operating cost?

Compare its listed power requirement with the required airflow and run time. Total savings depend on the complete system duty point.

What voltage is required by XG40561BX-1QA90-S9I?

The listed rating is 12 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.

Is XG40561BX-1QA90-S9I suitable for continuous operation?

The supplied product-line reference discusses long-life cooling, but continuous-duty limits for this full suffix must be verified from its datasheet and operating conditions.

Does XG40561BX-1QA90-S9I have a documented pressure rating?

Yes. The worksheet lists up to 16.2 Pa; compare it with the system curve.

Which performance figures define XG40561BX-1QA90-S9I?

Use the listed voltage, size, 52.8 m³/h airflow, 40000/38000 rpm for preliminary comparison.

相关产品

XG43564BX-1Q010-S9I | SUNON 50V 43x43x56mm 4.9m3/h DC Axial Fan for Industrial Cooling

Sized for servers and data-center electronics, SUNON XG43564BX-1Q010-S9I is a 50 VDC DC blower in a 43 × 43 × 56 mm frame. Its 4.9 m³/h airflow rating suits the stated equipment-cooling role. Treat the selection parameters as a primary input to application screening. Validate approvals and protection at complete-part-number level.

XG60561BX-1Q029-S9I | SUNON 60x60x56mm DC Axial Fan for Industrial Cooling

Equipment designers working with servers and data-center electronics can evaluate SUNON XG60561BX-1Q029-S9I, a DC blower rated at 0 VDC and sized 60 × 60 × 56 mm. Its 60 × 60 × 56 mm format is the main stated selection detail. Base project documentation on the stated cooling output. Reconcile the model code with the required electrical interface.

XG80801BX-1Q061-S9T | SUNON 12V 80x80x80mm 203.2m3/h DC Axial Fan for Industrial Cooling

SUNON XG80801BX-1Q061-S9T combines a 80 × 80 × 80 mm DC blower platform with a 12 VDC rating for servers and data-center electronics. Up to 203.2 m³/h is its most prominent listed performance figure. Use the documented system interface when planning technical purchasing. Request the exact performance curve for final engineering signoff.

XG80801BX-1Q110-S9T | SUNON 12V 80x80x80mm 199.89m3/h DC Axial Fan for Industrial Cooling

Used in servers and data-center electronics, SUNON XG80801BX-1Q110-S9T is a 12 VDC DC blower in a 80 × 80 × 80 mm frame. Up to 199.89 m³/h is its most prominent listed performance figure. Review its cooling specification during technical purchasing. Request the exact performance curve for final engineering signoff.

XG80801BX-1Q030-S9T | SUNON 12V 126W 80x80x80mm 187.7m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON XG80801BX-1Q030-S9T serves as a 80 × 80 × 80 mm DC blower operating at 12 VDC. The supplied data list 83.4 dB, an important acoustic selection parameter. Treat the duty-point values as a primary input to technical purchasing. Request the exact performance curve for final engineering signoff.

XG80564BX-1Q010-S9W | SUNON 51V 102W 80x80x56mm 169.6m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON XG80564BX-1Q010-S9W serves as a 80 × 80 × 56 mm DC blower operating at 51 VDC. The supplied data list 87.2 dB, an important acoustic selection parameter. Review its equipment fit during technical purchasing. Request the exact performance curve for final engineering signoff.

XG40561BX-1QA90-S9I SUNON 轴流风机

产品特点

产品特点

Reliable Fan Cooling

应用行业

Industrial Equipment

常见问题

Does XG40561BX-1QA90-S9I support speed control?

How can XG40561BX-1QA90-S9I affect operating cost?

What voltage is required by XG40561BX-1QA90-S9I?

Is XG40561BX-1QA90-S9I suitable for continuous operation?

Does XG40561BX-1QA90-S9I have a documented pressure rating?

Which performance figures define XG40561BX-1QA90-S9I?

相关产品

XG43564BX-1Q010-S9I | SUNON 50V 43x43x56mm 4.9m3/h DC Axial Fan for Industrial Cooling

XG60561BX-1Q029-S9I | SUNON 60x60x56mm DC Axial Fan for Industrial Cooling

XG80801BX-1Q061-S9T | SUNON 12V 80x80x80mm 203.2m3/h DC Axial Fan for Industrial Cooling

XG80801BX-1Q110-S9T | SUNON 12V 80x80x80mm 199.89m3/h DC Axial Fan for Industrial Cooling

XG80801BX-1Q030-S9T | SUNON 12V 126W 80x80x80mm 187.7m3/h DC Axial Fan for Industrial Cooling

XG80564BX-1Q010-S9W | SUNON 51V 102W 80x80x56mm 169.6m3/h DC Axial Fan for Industrial Cooling

在线留言