XG60561BX-1Q451-S9T SUNON 轴流风机

品牌：: SUNON

型号：: XG60561BX-1Q451-S9T | SUNON 12V 120W 60x60x56mm 118.1m3/h DC Axial Fan for Industrial Cooling

类型：: 轴流风机

应用行业：: 工业冷却

产品描述：: SUNON configures XG60561BX-1Q451-S9T as a 60 × 60 × 56 mm DC blower for servers and data-center electronics, operating at 12 VDC. The supplied data list 87.6 dB, an important acoustic selection parameter. Treat the pressure capability as a primary input to technical purchasing. Request the exact performance curve for final engineering signoff.

规格书：: XG60561BX-1Q451-S9T | SUNON 12V 120W 60x60x56mm 118.1m3/h DC Axial Fan for Industrial Cooling 规格书 (Pdf)

产品特点

Rated Voltage(V)	12
Size(mm)	60x60x56
Max.Air Flow(m³/h)	118.1
Max.Pressure(Pa)	12.46
Input Power(W)	120
Speed(rpm)	24800/23900
Noise(db)	87.6

产品特点

Reliable Fan Cooling

SUNON XG60561BX-1Q451-S9T brings active air movement to industrial equipment. This DC brushless axial fan helps equipment designers control thermal conditions around densely arranged parts.

The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. Correct airflow direction and inlet clearance help translate the documented operating point into reliable equipment-level cooling.

A dependable XG60561BX-1Q451-S9T installation starts with a review of exhaust separation. Complete environmental checks for service documentation to confirm compatibility, operating margin and the information needed for repeat orders. Separate discharge air from the intake path inside the finished enclosure.

应用行业

Industrial Equipment

SUNON XG60561BX-1Q451-S9T serves industrial machinery and electronic equipment. Airflow around controllers, drives and power devices helps address continuous internal heat. The fan gives OEM equipment a defined air route and supports stable equipment operation.

常见问题

Does XG60561BX-1Q451-S9T support speed control?

Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.

How can XG60561BX-1Q451-S9T affect operating cost?

Compare its listed 120 W input with the required airflow and run time. Total savings depend on the complete system duty point.

What speed is listed for XG60561BX-1Q451-S9T?

The listed speed is 24800/23900 rpm. Confirm frequency, control method, and duty point for the installed system.

What airflow value is listed for XG60561BX-1Q451-S9T?

The worksheet lists up to 118.1 m³/h. Verify the operating point against system resistance.

What bearing information is confirmed for XG60561BX-1Q451-S9T?

The exact bearing option is not confirmed by the row-level data. Check the complete suffix in the current SUNON specification.

相关产品

XG80801BX-1Q061-S9T | SUNON 12V 80x80x80mm 203.2m3/h DC Axial Fan for Industrial Cooling

SUNON XG80801BX-1Q061-S9T combines a 80 × 80 × 80 mm DC blower platform with a 12 VDC rating for servers and data-center electronics. Up to 203.2 m³/h is its most prominent listed performance figure. Use the documented system interface when planning technical purchasing. Request the exact performance curve for final engineering signoff.

XG80801BX-1Q110-S9T | SUNON 12V 80x80x80mm 199.89m3/h DC Axial Fan for Industrial Cooling

Used in servers and data-center electronics, SUNON XG80801BX-1Q110-S9T is a 12 VDC DC blower in a 80 × 80 × 80 mm frame. Up to 199.89 m³/h is its most prominent listed performance figure. Review its cooling specification during technical purchasing. Request the exact performance curve for final engineering signoff.

XG80801BX-1Q030-S9T | SUNON 12V 126W 80x80x80mm 187.7m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON XG80801BX-1Q030-S9T serves as a 80 × 80 × 80 mm DC blower operating at 12 VDC. The supplied data list 83.4 dB, an important acoustic selection parameter. Treat the duty-point values as a primary input to technical purchasing. Request the exact performance curve for final engineering signoff.

XG80561BX-1Q010-S9T | SUNON 12V 80x80x56mm 155.8m3/h DC Axial Fan for Industrial Cooling

Built for servers and data-center electronics, SUNON XG80561BX-1Q010-S9T uses a 80 × 80 × 56 mm DC blower arrangement at 12 VDC. The supplied data list 83.8 dB, an important acoustic selection parameter. Treat the suffix definition as a primary input to technical purchasing. Request the exact performance curve for final engineering signoff.

XG80561BX-1Q03C-S9T | SUNON 12V 80x80x56mm 163.5m3/h DC Axial Fan for Industrial Cooling

A 80 × 80 × 56 mm frame and 12 VDC rating define XG80561BX-1Q03C-S9T, a DC blower for servers and data-center electronics. 9.68 Pa maximum pressure is the standout documented duty-point value. During technical purchasing, compare the model's thermal-duty record. Request the exact performance curve for final engineering signoff.

XG60561BX-1Q162-S9T | SUNON 12V 82.8W 60x60x56mm 102.2m3/h DC Axial Fan for Industrial Cooling

SUNON XG60561BX-1Q162-S9T combines a 60 × 60 × 56 mm DC blower platform with a 12 VDC rating for servers and data-center electronics. The supplied data list 83.1 dB, an important acoustic selection parameter. Base technical purchasing on the stated dimensional envelope. Request the exact performance curve for final engineering signoff.

XG60561BX-1Q451-S9T SUNON 轴流风机

产品特点

产品特点

Reliable Fan Cooling

应用行业

Industrial Equipment

常见问题

Does XG60561BX-1Q451-S9T support speed control?

How can XG60561BX-1Q451-S9T affect operating cost?

What speed is listed for XG60561BX-1Q451-S9T?

What airflow value is listed for XG60561BX-1Q451-S9T?

What bearing information is confirmed for XG60561BX-1Q451-S9T?

相关产品

XG80801BX-1Q061-S9T | SUNON 12V 80x80x80mm 203.2m3/h DC Axial Fan for Industrial Cooling

XG80801BX-1Q110-S9T | SUNON 12V 80x80x80mm 199.89m3/h DC Axial Fan for Industrial Cooling

XG80801BX-1Q030-S9T | SUNON 12V 126W 80x80x80mm 187.7m3/h DC Axial Fan for Industrial Cooling

XG80561BX-1Q010-S9T | SUNON 12V 80x80x56mm 155.8m3/h DC Axial Fan for Industrial Cooling

XG80561BX-1Q03C-S9T | SUNON 12V 80x80x56mm 163.5m3/h DC Axial Fan for Industrial Cooling

XG60561BX-1Q162-S9T | SUNON 12V 82.8W 60x60x56mm 102.2m3/h DC Axial Fan for Industrial Cooling

在线留言