FN063-ZIQ.GL.V7P3 ZIEHL-ABEGG 轴流风机

品牌：: ZIEHL-ABEGG

型号：: FN063-ZIQ.GL.V7P3 | ZIEHL-ABEGG 3~380-480V 3700W EC Axial Fan for Cooling & Ventilation Systems

类型：: 轴流风机

应用行业：: 暖通空调与通风

产品描述：: Specified for HVAC Systems, ZIEHL-ABEGG FN063-ZIQ.GL.V7P3 is a 380-480V EC axial fan, centered on a listed airflow of 21,500 m³/h. This clarifies the model's listed capability. This rating informs planning.

规格书：: FN063-ZIQ.GL.V7P3 | ZIEHL-ABEGG 3~380-480V 3700W EC Axial Fan for Cooling & Ventilation Systems 规格书 (Pdf)

产品特点

Rated Voltage(V)	3`380-480
Size(mm)	630
Max.Air Flow(m³/h)	21500
Max.Pressure(Pa)	350
Input Power(W)	3700
Speed(rpm)	1600
Noise(db)	92

产品特点

High Static Airflow

The ZIEHL-ABEGG FN063-ZIQ.GL.V7P3 is an EC axial fan for refrigeration cooling, telecom equipment, supporting equipment thermal management and integration.

Data includes 3~380-480 V operation, airflow up to 21500 m³/h and pressure up to 350 Pa so designers can evaluate the required duty point against installation losses. Listed noise is 92 dB at the stated test point. The datasheet lists ball-bearing support, bionic blade geometry, MODBUS speed control for durable motor support. Careful attention to wiring and inlet geometry supports efficient heat removal without unnecessary aerodynamic loss.

The available selection evidence improves replacement planning during specification review before release to production.

应用行业

Refrigeration Cooling

The FN063-ZIQ.GL.V7P3 ZIEHL-ABEGG fan is suitable for refrigeration and cooling equipment where forced airflow supports heat rejection, component protection and stable operation under recurring thermal loads.

Telecom Equipment

The FN063-ZIQ.GL.V7P3 ZIEHL-ABEGG fan is used in communication equipment and cabinets where continuous heat generation requires reliable ventilation to protect electronic hardware and system availability.

HVAC Systems

The FN063-ZIQ.GL.V7P3 ZIEHL-ABEGG fan is used in HVAC equipment to move air through internal passages and heat-exchange sections, supporting ventilation, temperature control and dependable system operation.

Chiller Systems

The FN063-ZIQ.GL.V7P3 ZIEHL-ABEGG fan is applied in chiller equipment where steady air movement supports heat rejection, temperature control and dependable operation of the refrigeration circuit.

常见问题

Is inventory stable for the FN063-ZIQ.GL.V7P3?

The workbook marks it In Stock, but quantity and lead time should be reconfirmed at quotation because availability can change.

What should be inspected if airflow drops on the FN063-ZIQ.GL.V7P3?

Check for blocked airflow paths, incorrect supply, loose wiring, abnormal rotation or system resistance before consulting the exact service documentation.

What distinguishes the FN063-ZIQ.GL.V7P3 from a general-purpose fan?

Its EC axial fan configuration and a listed airflow of 21,500 m³/h provide model-specific criteria for matching HVAC Systems systems.

Can the FN063-ZIQ.GL.V7P3 help control total ownership cost?

Correct sizing and operation within documented limits can reduce avoidable thermal stress and maintenance events; project savings require duty-cycle analysis.

相关产品

FN063-ZIQ.GG.V7P3 | ZIEHL-ABEGG 3~380-480V 1850W EC Axial Fan for Cooling & Ventilation Systems

Intended for HVAC Systems, ZIEHL-ABEGG FN063-ZIQ.GG.V7P3 is a 380-480V EC axial fan, identified by a listed airflow of 16,948 m³/h. It gives engineers a clear comparison point. The figure guides duty evaluation.

FN080-ZIQ.GL.V7P3 | ZIEHL-ABEGG 3~380-480V 3100W EC Axial Fan for Cooling & Ventilation Systems

Focused on HVAC Systems, ZIEHL-ABEGG FN080-ZIQ.GL.V7P3 is a 380-480V EC axial fan, offering a listed acoustic value of 0 dB. This enables specification-led selection. The figure supports sourcing.

FN025-4QE.UA.V5P3 | ZIEHL-ABEGG 230V 16W AC Axial Fan for Cooling & Ventilation Systems

Oriented toward HVAC and Refrigeration, ZIEHL-ABEGG FN025-4QE.UA.V5P3 is a 230 V AC axial fan, defined by a documented 16 W input rating. It gives buyers a documented reference. This helps verify equipment fit.

FN050-4DA.4I.V7P1 | ZIEHL-ABEGG 3~230-400V 770W AC Axial Fan for Cooling & Ventilation Systems

Chosen for HVAC Systems, the ZIEHL-ABEGG FN050-4DA.4I.V7P1 is a 230-400V AC axial fan, for which the table lists a listed pressure capability of 160 Pa. This supports technical purchasing review.

FN063-VDK.6N.V7P4 | ZIEHL-ABEGG 400V AC Axial Fan for Cooling & Ventilation Systems

Specified for HVAC and Refrigeration, the ZIEHL-ABEGG FN063-VDK.6N.V7P4 is a 400 V AC axial fan, presenting 630 mm dimensions for installation planning. This assists electrical and mechanical review.

FN056-VDW.4M.A7P | ZIEHL-ABEGG 3~400V 1350W AC Axial Fan for Cooling & Ventilation Systems

Built for HVAC Systems, ZIEHL-ABEGG FN056-VDW.4M.A7P is a 400V AC axial fan, presenting a listed pressure capability of 200 Pa. It supports an evidence-based shortlist. This rating informs planning.

FN063-ZIQ.GL.V7P3 ZIEHL-ABEGG 轴流风机

产品特点

产品特点

High Static Airflow

应用行业

Refrigeration Cooling

Telecom Equipment

HVAC Systems

Chiller Systems

常见问题

Is inventory stable for the FN063-ZIQ.GL.V7P3?

What should be inspected if airflow drops on the FN063-ZIQ.GL.V7P3?

What distinguishes the FN063-ZIQ.GL.V7P3 from a general-purpose fan?

Can the FN063-ZIQ.GL.V7P3 help control total ownership cost?

相关产品

FN063-ZIQ.GG.V7P3 | ZIEHL-ABEGG 3~380-480V 1850W EC Axial Fan for Cooling & Ventilation Systems

FN080-ZIQ.GL.V7P3 | ZIEHL-ABEGG 3~380-480V 3100W EC Axial Fan for Cooling & Ventilation Systems

FN025-4QE.UA.V5P3 | ZIEHL-ABEGG 230V 16W AC Axial Fan for Cooling & Ventilation Systems

FN050-4DA.4I.V7P1 | ZIEHL-ABEGG 3~230-400V 770W AC Axial Fan for Cooling & Ventilation Systems

FN063-VDK.6N.V7P4 | ZIEHL-ABEGG 400V AC Axial Fan for Cooling & Ventilation Systems

FN056-VDW.4M.A7P | ZIEHL-ABEGG 3~400V 1350W AC Axial Fan for Cooling & Ventilation Systems

在线留言