XG80804BX-1Q110-S9T SUNON 轴流风机

品牌：: SUNON

型号：: XG80804BX-1Q110-S9T | SUNON 54V 80x80x80mm 211.8m3/h DC Axial Fan for Industrial Cooling

类型：: 轴流风机

应用行业：: 工业冷却

产品描述：: Within servers and data-center electronics, SUNON XG80804BX-1Q110-S9T serves as a 80 × 80 × 80 mm DC blower operating at 54 VDC. The supplied data list 87.6 dB, an important acoustic selection parameter. Base technical purchasing on the stated application data. Request the exact performance curve for final engineering signoff.

规格书：: XG80804BX-1Q110-S9T | SUNON 54V 80x80x80mm 211.8m3/h DC Axial Fan for Industrial Cooling 规格书 (Pdf)

产品特点

Rated Voltage(V)	54
Size(mm)	80x80x80
Max.Air Flow(m³/h)	211.8
Max.Pressure(Pa)	11.53
Speed(rpm)	17500/15500
Noise(db)	87.6

产品特点

High Airflow Cooling

SUNON XG80804BX-1Q110-S9T supports industrial equipment with DC brushless axial fan airflow. It is intended for installations where predictable air exchange is central to equipment stability.

The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market.

To integrate XG80804BX-1Q110-S9T effectively, review outlet geometry at equipment level and arrange replacement-fit checks for service documentation. Confirmed system compatibility supports stable cooling and repeatable procurement. Verify mounting, connector and airflow direction against the replacement space. The final assembly should be tested under its expected thermal load.

应用行业

Industrial Equipment

SUNON XG80804BX-1Q110-S9T serves industrial machinery and electronic equipment. Airflow around controllers, drives and power devices helps address continuous internal heat. The fan gives OEM equipment a defined air route and supports stable equipment operation.

常见问题

Why choose XG80804BX-1Q110-S9T over a general cooling fan?

Its documented 54 VDC rating and the supplied data list 87.6 db, an important acoustic selection parameter. allow comparison with the required duty point without assuming unlisted options.

What speed is listed for XG80804BX-1Q110-S9T?

The listed speed is 17500/15500 rpm. Confirm frequency, control method, and duty point for the installed system.

What should be checked if XG80804BX-1Q110-S9T stops?

Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.

Does XG80804BX-1Q110-S9T have a documented pressure rating?

Yes. The worksheet lists up to 11.53 Pa; compare it with the system curve.

What input power is listed for XG80804BX-1Q110-S9T?

Input power is not stated in the supplied row and requires confirmation.

Can XG80804BX-1Q110-S9T serve high-reliability cooling systems?

Assess reliability from the exact bearing, temperature, protection, and life data. The supplied series note alone does not confirm every suffix-specific option.

相关产品

XG80801BX-1Q110-S9T | SUNON 12V 80x80x80mm 199.89m3/h DC Axial Fan for Industrial Cooling

Used in servers and data-center electronics, SUNON XG80801BX-1Q110-S9T is a 12 VDC DC blower in a 80 × 80 × 80 mm frame. Up to 199.89 m³/h is its most prominent listed performance figure. Review its cooling specification during technical purchasing. Request the exact performance curve for final engineering signoff.

XG80801BX-1Q030-S9T | SUNON 12V 126W 80x80x80mm 187.7m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON XG80801BX-1Q030-S9T serves as a 80 × 80 × 80 mm DC blower operating at 12 VDC. The supplied data list 83.4 dB, an important acoustic selection parameter. Treat the duty-point values as a primary input to technical purchasing. Request the exact performance curve for final engineering signoff.

XG80561BX-1Q010-S9T | SUNON 12V 80x80x56mm 155.8m3/h DC Axial Fan for Industrial Cooling

Built for servers and data-center electronics, SUNON XG80561BX-1Q010-S9T uses a 80 × 80 × 56 mm DC blower arrangement at 12 VDC. The supplied data list 83.8 dB, an important acoustic selection parameter. Treat the suffix definition as a primary input to technical purchasing. Request the exact performance curve for final engineering signoff.

XG80561BX-1Q03C-S9T | SUNON 12V 80x80x56mm 163.5m3/h DC Axial Fan for Industrial Cooling

A 80 × 80 × 56 mm frame and 12 VDC rating define XG80561BX-1Q03C-S9T, a DC blower for servers and data-center electronics. 9.68 Pa maximum pressure is the standout documented duty-point value. During technical purchasing, compare the model's thermal-duty record. Request the exact performance curve for final engineering signoff.

XG60561BX-1Q451-S9T | SUNON 12V 120W 60x60x56mm 118.1m3/h DC Axial Fan for Industrial Cooling

SUNON configures XG60561BX-1Q451-S9T as a 60 × 60 × 56 mm DC blower for servers and data-center electronics, operating at 12 VDC. The supplied data list 87.6 dB, an important acoustic selection parameter. Treat the pressure capability as a primary input to technical purchasing. Request the exact performance curve for final engineering signoff.

XG60561BX-1Q162-S9T | SUNON 12V 82.8W 60x60x56mm 102.2m3/h DC Axial Fan for Industrial Cooling

SUNON XG60561BX-1Q162-S9T combines a 60 × 60 × 56 mm DC blower platform with a 12 VDC rating for servers and data-center electronics. The supplied data list 83.1 dB, an important acoustic selection parameter. Base technical purchasing on the stated dimensional envelope. Request the exact performance curve for final engineering signoff.

XG80804BX-1Q110-S9T SUNON 轴流风机

产品特点

产品特点

High Airflow Cooling

应用行业

Industrial Equipment

常见问题

Why choose XG80804BX-1Q110-S9T over a general cooling fan?

What speed is listed for XG80804BX-1Q110-S9T?

What should be checked if XG80804BX-1Q110-S9T stops?

Does XG80804BX-1Q110-S9T have a documented pressure rating?

What input power is listed for XG80804BX-1Q110-S9T?

Can XG80804BX-1Q110-S9T serve high-reliability cooling systems?

相关产品

XG80801BX-1Q110-S9T | SUNON 12V 80x80x80mm 199.89m3/h DC Axial Fan for Industrial Cooling

XG80801BX-1Q030-S9T | SUNON 12V 126W 80x80x80mm 187.7m3/h DC Axial Fan for Industrial Cooling

XG80561BX-1Q010-S9T | SUNON 12V 80x80x56mm 155.8m3/h DC Axial Fan for Industrial Cooling

XG80561BX-1Q03C-S9T | SUNON 12V 80x80x56mm 163.5m3/h DC Axial Fan for Industrial Cooling

XG60561BX-1Q451-S9T | SUNON 12V 120W 60x60x56mm 118.1m3/h DC Axial Fan for Industrial Cooling

XG60561BX-1Q162-S9T | SUNON 12V 82.8W 60x60x56mm 102.2m3/h DC Axial Fan for Industrial Cooling

在线留言